*牌：RETZ瑞茨我們一直致力于流體控制和測控領域的持續創新，始于2005……

氣動刀型閘閥(漿液閥)分為上下兩部分，上半部分為氣動執行器，下半部分為刀閥,其結構可以做成硬密封、軟密封，與氣動執行器輔助配合,利用氣動執行器控制閥門，從而實現閥門的開和關的一種閥門 The pneumatic knife type gate valve (slurry valve) is divided into two parts: the upper part is a pneumatic actuator, and the lower part is a knife valve. Its structure can be made into a hard seal and a soft seal, which can be used in conjunction with the pneumatic actuator to control the valve and achieve the opening and closing of the valve

進口氣動刀型閘閥產品詳情 Product details

進口氣動刀型閘閥(漿液閥)的閘板關閉到位時通徑無死角，根據流體分析設計沖力，自動沖解通徑死角處雜物使介質通過更順暢；內部設有弧形刮片使閘板在啟閉工作全面積刮凈表面使壽命更長，防止介質殘留在閥腔，造成閥門開關不暢 RETZ When the gate of the pneumatic knife type gate valve (slurry valve) is closed in place, there is no dead angle in the diameter. According to the fluid analysis, the impulse is designed to automatically flush the debris at the dead angle of the diameter to make the medium pass more smoothly; Arc scraper is set inside to make the gate clean in the full area of the opening and closing work, so as to prolong the service life and prevent the medium from remaining in the valve chamber, causing the valve to open and close smoothly

閘板鋒利切割力強，表面平整 The ram has strong cutting force and flat surface

進口氣動刀型閘閥執行器參數 Actuator parameters

 進口氣動刀型閘閥(漿液閥)規格說明 Description

公稱壓力 Nominal Pressure：PN10/150LB

規格尺寸 Size：2～32”

適用溫度 Temperature: 軟密封≤ 80℃、120℃,硬密封≤ 350℃、≤ 700℃