RETZ瑞茨/我們一直致力于流體控制和測控領域的持續創新，始于2005……(對夾式)進口電動超薄型球閥的閥體比一般法蘭球閥結構短，適用于工廠同一管路閥門數量多的場合。球體具有旋轉的90度動作，球有圓形通孔通過軸線，當球旋轉90度時，在進、出口處應全部呈現球面，從而截斷流動，反之既呈現通孔，使介質通過

retz The valve body of imported electric ultra-thin ball valves (wafer type) has a shorter structure than ordinary flange ball valves, and is suitable for situations where there are many valves in the same pipeline in the factory. The sphere has a rotating 90 degree action, with a circular through-hole passing through the axis. When the sphere rotates 90 degrees, it should all present a spherical surface at the inlet and outlet, thereby cutting off flow. Conversely, it should present a through-hole, allowing the medium to pass through

用途慨述 Overview of use

(對夾式)進口電動超薄型球閥球芯通道形狀有V形及O形。主要適用于兩位切斷、調節的場合。球閥與執行機構的連接采用直連方式，電動執行機構內進口電動超薄型球閥2.jpg置伺服系統，無須另配伺服放大器，輸入4-20mA信號及220VAC電源即可控制運轉。電動對夾球閥具有連線簡單，結構緊湊、尺寸小、重量輕、阻力小、動作穩定可靠等優點。本閥與普通球閥相比，具有結構長度短、重量輕、安裝方便、節省材料等顯著的優點。此外，閥座采用彈性密封結構，密封可靠，啟閉輕松。對夾球閥設有耐火結構，萬一發生火災時，仍然能夠可靠操作并具有良好的密封性 retz (wafer type) imported electric ultra-thin ball valve has rectangular, V-shaped and O-shaped channel shapes. It is mainly applicable to two-position cut-off and adjustment occasions. The connection between the ball valve and the actuator adopts the direct connection mode. The electric actuator has a built-in servo system. It does not need to be equipped with a servo amplifier. The operation can be controlled by inputting 4-20mA signal and 220VAC power supply. Electric wafer ball valve has the advantages of simple connection, compact structure, small size, light weight, small resistance, stable and reliable action, etc. Compared with ordinary ball valve, this valve has the advantages of short structure length, light weight, convenient installation, and material saving. In addition, the valve seat adopts elastic sealing structure, which is reliable and easy to open and close. The double-clip ball valve is equipped with fire-resistant structure, which can still be operated reliably and has good sealing performance in case of fire

設計特色 Design features

全通徑式設計、無阻隔 Full bore design, no barrier

防火型式密封結構 Fireproof type seal structure

防噴出閥桿結構 Anti-spray valve stem structure

防低泄漏設計填料及填料函 Low leakage prevention design packing and stuffing box

閥球上設計有壓力平衡孔 The valve ball is designed with a pressure balance hole

球體可做成O型和V型兩種 The ball can be made into O type and V type

雙層閥桿填料與對壓碟型彈片裝置 Double-layer valve stem packing and counter-pressure disc spring device

技術參數及性能 Technical parameters and performance

執行機構技術參數 閥體參數

電源 AC200 / 380V 公稱通徑 DN15～150mm

輸出力矩 50N?M～2000N?M 公稱壓力 PN1.6 2.5 MPa(定制)

動作范圍 0～90° 0～360° 泄漏量 軟密封:零泄漏

動作時間 15秒/30秒/60秒 執行機構 可另配電子式電動執行機構

保護裝置 過熱保護 流量特性 快開特性

環境溫度 -30°～60° 可調范圍 DN15-80    DN100-150

250:1 350:1

手動操作 同附帶手柄操作 閥體形式 整體式鍛造、整體式鑄造

限位 電氣、機械二重限位 連接形式 超薄法蘭式、對夾式

防護等* 相當于IP-65 閥芯形式 "O"型球形閥芯

位置測量 可選裝開關或電位計 密封填料 V型聚四氟乙烯填料、柔性石墨填料等

驅動電機 8W/E 基本誤差 ±1%

防爆等* ExdII BT4

ExdII BT6  死區 ≤1%

回差 ≤1%

控制方式 開關量控制

模擬量控制 適用溫度 密封面