RETZ/我們一直致力于流體控制領域的持續創新,始于2005……進口流體粘度通常在50cst 以下可以任意選擇,若超過此值,則需要選擇高粘度電磁閥 Retz The fluid viscosity is usually below 50cst and can be arbitrarily selected. If it exceeds this value, a high viscosity solenoid valve needs to be selected
進口高粘度電磁閥工作原理-Working principle of imported high viscosity solenoid valve
常閉式:Normally closed
當線圈通電時,先導閥芯吸合,先導孔打開,閥上腔卸壓,活塞靠下腔介質壓力推動,電磁閥打開。當線圈斷電時,先導閥芯靠彈簧復位,先導孔關閉,閥上腔由活塞節流孔增壓和復位彈簧的推力,電磁閥關閉。
When the coil is energized, the pilot valve core is closed, the pilot hole opens, the upper chamber of the valve is depressurized, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve opens. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, and the valve upper chamber is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.
常開式:Normally open
當線圈通電時,先導閥芯靠彈簧復位,先導孔關閉,閥上腔由活塞節流孔增壓和復位彈簧的推力,電磁閥關閉。當線圈斷電時,先導閥芯靠彈簧復位,先導孔打開,閥上腔卸壓,活塞靠下腔介質壓力推動,電磁閥打開。
When the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, and the valve upper chamber is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the upper chamber of the valve is depressurized, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve opens.
注:出口端壓力大于進口端壓力,介質會反向導通。可安裝止回閥 Note: If the outlet pressure is greater than the inlet pressure, the medium will conduct in the opposite direction. Can be installed with a check valve
進口高粘度電磁閥選型參數--
產品規格:1/2-4"
閥體材質:不銹鋼 、鑄鋼
介質溫度: -40℃ ~+200 ℃
適用壓力:0~1.6MPa
防護性能:防水、防爆(DⅡCT5、ExdⅡCT5、ExmbⅡCT4、ExdⅡCT4)、防腐。
防護等*:IP67、IP65
閥芯材質: 均為不銹鋼
接線方式:接線座式、引線式、插頭式
控制方式:常開、常閉
電源電壓:DC24~127V;AC36~380V
連接方式:內螺紋、法蘭
適用介質:液體、油品、瀝青高粘度流體等,小于50CSt (大于50時需定制)
泄 漏 量: 零
富林克致力于作為流體控制專家,負責中國地區RETZ產品的營銷管理和服務,從而創造價值的企業,RETZ以“堅持更好的品質”為根本,以“持續實現具有創造性、*品質產品和服務的企業價值,為當今社會的繁榮作出貢獻”為企業理念。