給紙部 Feeder Equipped with vibrating motor With independent transmission, low noise, with front adjustable wheels, max working capacity can be achieved Feeding knives and left and right registers fixing bar are controlled up and down by pneumatic system easily. Feeding knifes are equipped with pneumatic mechanism for smoother feeding. 采用高強度專用震動馬達,僅使連接部位通過震動輸紙更加順暢穩定。 獨立式傳動低噪音,配合前方調節輪高低速操作時,精確傳送紙張,以達*高產能。 給紙刀及左右定規固定桿,以氣動方式上下,操作有力。給紙刀附加氣壓裝置,以適度之加壓使出紙更平順。 |
紙張校正部 Alignment section Automatic alignment system to correct the paper feeding, avoiding the paper going to sides. 配有自動修正裝置,對出紙產生的歪斜現象進行修復,確保紙張準確輸送。 |
|
鎖底部 Lock-bottom Section Lock-bottom assembly mechanism with high elastic hookers is of ideal design,fast and easy operation Modular-design lock-bottom section reduces the box change-over time, enhances the installing and changing time for the parts. Lock-bottom section of modular design reduces the adjusting time for different boxes, and enhances the change-over time for installing attached parts. Four lock-bottom hooks and attachments are equipped. 配備勾底組合調整機構,理想設計,操作快速簡易,加上高剛性彈簧勾子座以穩定之勾底方式作業。 模塊化設計的鎖底單元,明顯減少了變換工作時的調校時間,提高附件安裝與轉換時間。 配備4套高彈性勾子座及勾底盒模塊。 |
下糊筒 Lower Gluing Tank Big-volume design,when the machine is running at high speed,the glue will not go out or leaking.Optional bottle is good for long time operation. 下糊筒加大容量設計,高速時不甩膠、不漏膠,大型膠水添加瓶,可長時間使用。 |
|
本折部 Folding Section Equipped with speed variator for belts, ensure the folded boxes parallel and in good order. Fast, convenient adjustment and operation can fold boxes perfectly. The middle up and down transmission module can fold the boxes synchronously or alternately. 裝有皮帶變速器,可有效確保折疊紙盒的平行對齊。 可符合多樣式的調整操作,快速、便利,使其盒樣能準確的閉合。 擁有中間上下傳輸模塊,能對紙盒進行同步或交替折疊。 |
壓著部 Transfer section Pressure can be adjusted according to paper thickness. For flute A, B corrugated board, overlapping and jogger devices are equipped to ensure box gluing well. After kicker is set up, whatever speed the machine runs,the kicker can automatically follow, no need to reset it. 上壓桿可配合紙盒厚度調整壓力,使紙盒適度加壓。為了A、B瓦的使用,加設紙盒堆疊、拍齊裝置確保紙盒粘貼精確,噴踢記號設定后,不論速度快慢,均可自動追蹤,無須因速度改變而重新設定。 |
|
輸送部 Conveyor Pneumatic pssure increasing, speed and pssure can be independently adjusted,pssure could be a bit increased on boxes, so the finished boxes will be more beautiful. The front section of conveyor can coordinated with overlapping and jogger devices to move up and down suitably. 氣動式加壓,可獨立調速壓力,紙盒可做適度加壓,而使成品加壓**美。 前端可配合堆疊、拍齊裝置作適當的上下擺動。 |
||