1.歐帝斯KSPT免烘烤絲印金屬油墨采用高級進口丙烯酸樹脂和高級顏料經過細制研磨加工組合而成，常溫25度以上免烘烤24小時自干可以達到理想效果，（除304不銹鋼/鈦合金/陽極氧化以外）大部分金屬和塑膠產品無需加固化劑可以自干；應急60-120度烘烤10分鐘即可獲得優異的附著力

1.KSPT series of printing ink is made of advanced imported acrylic resin and high grade pigment through fine grinding and grinding. The ideal effect can be achieved by free drying for 24 hours at room temperature more than 25 degrees. (except for 304 stainless steel / titanium alloy / anodic oxidation) most of the metal and plastic products can be dry without curing agent; emergency 60-120 Excellent adhesion can be obtained by 10 minutes of baking

2、適合：適用于塑膠，鋁合金，五金表面陽極氧化面以及白鐵皮/普通不銹鋼/ABS/亞克力等材料絲印及移印

2, suitable for: plastic, aluminum alloy, metal surface anodized surface and white iron sheet / ordinary stainless steel /ABS/ acrylic and other materials screen printing and pad printing

3、烘烤恒溫： 低溫60度/40分鐘，高溫 120度20分鐘恒溫烘烤，等產品冷卻后可以做物理破壞檢測

3, baking constant temperature: low temperature 60 degrees /40 minutes, high temperature 120 degrees 20 minutes constant temperature baking, and other products can be cooled after physical damage detection.

4、油墨調配方法：加稀釋劑5-10%左右稀釋到印刷適合粘度攪拌均勻，根據當時的實際環境條件選用稀釋劑：快干、中干、慢干稀釋劑，一般情況為冷天（≤15℃）選用快干劑，而熱天（≥30℃）選用慢干劑。

4, the method of printing ink: dilute the diluent about 5-10% to the press suitable for the viscosity and stirring evenly. According to the actual conditions at that time, the thinner is selected: fast drying, middle dry and slow dry thinner. In general, the fast drying agent is selected for cold weather (less than 15 degrees C), and the slow drying agent is selected in hot weather (> 30 degrees C).

5、色澤：26色常用色，其他特殊顏色可以調配；使用期限：壹年，過期請慎用，加了其他助劑剩余油墨不可回收。

5, color: 26 colors commonly used color, other special colors can be allocated; use period: one year, expired, please use carefully, plus other auxiliaries, the remaining ink can not be recycled.

6、不得與其它類型油墨混合使用，否則容易出現其他附著力，化學反應等不良現象。

6, do not mix with other types of ink, otherwise prone to other adhesion, chemical reaction and other bad phenomena.

其他注意事項：

Other notices:

1．各種承印物料的外觀相似，務必確認承印物的材料是否相符，客戶需先試印，確其符合要求后，再批量生產。

1. the appearance of all kinds of printing materials is similar. It is necessary to confirm whether the materials of the substrate are in conformity with each other, and that the customers need to try them out first.

2．印刷前先清除印件表面的塵埃及油漬，可用無水乙醇（*）或抹字水清除，以促進附著效果，在移印過程中，如出現拉絲或散開，可適當加入一些慢干膏即可;

2. before printing, remove the dust and oil stains on the surface of the printing parts. It can be removed by alcohol or water to promote the effect of attachment. In the process of printing, some slow dry ointments can be properly added, such as drawing or dispersing.

3．未經測試情況下，不得將本系列油墨與其它類型油墨混用及配色，環境溫度過低，將會影響油墨原有的質量。

3. without testing, the ink and other types of ink should not be mixed and collocated. If the ambient temperature is too low, the original quality of the ink will be affected.

4．注意作業車間的濕度，濕度過大會影響附著力，溫度高容易堵網。

4. pay attention to the humidity and humidity of the workshop, which will affect adhesion.

5、使用時注意施工場所的通風狀況良好。盡量避免皮膚直接接觸

5. Attention should be paid to ventilation in the construction site when using. Try to avoid direct skin contact

6、本品不慎濺入口、鼻、眼、耳內，應用大量水清洗或直接求助醫生。

6, this product splashes into the mouth, nose, eyes and ears, and applies a lot of water to clean or seek help from the doctor directly.

7、對本品過敏者，使用前應涂覆一層皮膚扶膚膏或戴不滲透手套。

7. Allergic to this product should be coated with a skin cream or an impermeable glove before use.

8、根據氣候變化，請遠離火源，陰暗處1度-25度環境下存放，油墨，稀釋劑使用及儲存時嚴禁煙火

8, according to climate change, please keep away from fire sources and store at 1 degrees -25 in the shade. Ink and diluent are strictly prohibited when using and storing.

以上色漿經SGS檢測符合ROSH標準非醫療標準. 敬告：以上資料記載為本公司實驗室資料數據，僅供參考，不作擔保和承諾依據，大批量生產前需按客戶要求測試合格后方可批量生產，無遵照以上操作方法導致的一切損失本公司一概不負責任！

The above color pulp is measured by the non medical standard of ROSH standard by SGS. The above information is recorded as the company's laboratory data, only for reference, no guarantee and commitment basis. Before large batch production, it is necessary to test the batch production according to the customer's requirements and do not comply with all the losses caused by the above operation methods. No responsibility!

俗稱：*能油墨，自干金屬油墨 metal from dry ink 金屬自干油墨

Commonly known as universal ink, self drying metal ink metal from dry ink metal self drying ink.