超高壓耐靜水壓測試儀

Ultra- High Hydrostatic Head Tester

針對特殊要求的超高壓耐靜水壓測試儀，可檢測試樣在一定壓力下的拒水性能，試樣被固定在100cm²面積的試樣夾上。單片機控制，液晶顯示，壓力曲線顯示，伺服馬達水泵控制加壓速度。水壓(水柱高度)上升速率可以任意設定0-500cmH2O/min.配置微型打印機記錄每次測試數據。獨具恒速加壓和持壓功能。

For special requirements to the Ultra-High Hydrostatic tester. To determine the resistance of fabrics to water penetration under pressure whilst firmly clamped in the test rig of 100cm2 area. Water pressure is applied by means of compressed air and distilled water with a range of 0-500cm H20/min water gauge full scale recorded on a digital display. The rate of rise is adjustable by digital control and display and recorded in centimetres per minute.

技術指標Techniques:

樣品夾持力：液壓系統加壓-大于30噸（可定制），分為手動，自動兩種

Sample Nipping Strength:Hydraulic pressure system - more than 30 tons (customized), divided into manual and automatic

技術參數 Techniques:

*大測試壓力The most testing Pressure：60M

加壓速度Pressure Speed ：任意設定0-500cmH2O/min

LS-015A 手動加壓型   LS-015A Manual Pressure

LS-015B 自動加壓型    LS-015B Automatic Pressure

外形尺寸Dimensions ： 605×505×830mm（L×W×H）   

重量Weight: 150.00kg

標準Standards：ISO 811 BS EN 20811/3321/3324 DIN 53886  AFNOR GO7-057  ERT 120-1，160-0  AATCC 127