上海斌勤電氣技術有限公司
聯 系 人：安 心 (女士)

SINUMERIK 802S base line是專門為中國數控機床市場而開發的經濟型 CNC 控制系統。其特性如下: SINUMERIK 802S base line is an optimized CNC system developed for Chinese CNC machine market. The main features are:
  
結構緊湊，高度集成于一體的數控單元，操作面板，機床操作面板和輸入輸出單元。
Compact control comprising of CNC, PLC, MCP and I/O section.
  
機床調試配置數據少，系統與機床匹配更快速、更容易。
   Optimized NC data for commissioning. Machine tool up easily.
  
簡單而友好的編程界面，*保*了生產的快速進行，優化了機床的使用。
Friendly HMI interface to insure the productivity and machine tool operating.

SINUMERIK 802S base line集成了所有的數控單元，PLC，人機界面，輸入/輸出單元于一身：
SINUMERIK 802S base line integrates the CNC, PLC, HMI and I/O section together:

可獨立于其他部件進行安裝。堅固而又節省空間的設計，使它可以安裝到*方便用戶的位置。 It can mount independent of other components. Robust and space-saving design, it can be installed to the most user-friendly position.

操作面板提供了完成所有數控操作，編程的按鍵以及8英寸LCD顯示器，同時還提供12個帶有LED 的用戶自定義鍵。工作方式選擇，進給速度修調，主軸速度修調，數控啟動與數控停止，系統復位均采用按鍵形式進行操作,可以選配西門子機床操作擴展面板。
Machine control panel provides a complete numerical control operation, programming buttons and 8′' screen. NC key board for operating and programming, 12 LED's for each of user defined key. NC mode change, feeding override, spindle override, NC start/NC stop/NC Reset can all be controlled by button. Extension machine control panel also available as option.

SINUMERIK 802S base line的輸入/輸出點為：48個24V的直流輸入和16個 24V的直流輸出。輸出點的同時工作系數為0.5，單個輸出點的負載能力可達0.5A。為了方便安裝，輸入輸出采用可移動的螺絲夾緊端子，該端子可用普通的螺絲刀來緊固。
SINUMERIK 802S base line's I/O numbers: 48 Inputs (24V DC) and 16 outputs (24V DC). Simultaneity factor of outputs is 0.5. Output current for each output is 0.5A. Inputs and outputs are designed as terminal for easy mounting and they could be fixed via normal screw driver.

SINUMERIK 802S base line可控制三個進給軸和1個帶+/-10V電壓的模擬主軸。
SINUMERIK 802S base line was developed for operating up to 3 feeding axis and 1 analogue spindle though +/- 10V interface.

SINUMERIK 802S base line 提供脈沖及方向信號的驅動接口，可使用Sinamics V60 伺服驅動器以及1FL5電機。
SINUMERIK 802S base line provides interface for stepper drives. Sinamics V60 servo drive and 1FL5 servo motor could be used with SINUMERIK 802S base line.

SINUMERIK 802S base line的系統軟件已經存儲在數控部分的Flash-EPROM (閃存)上，調試所需的Toolbox軟件工具包含在標準的供貨范圍內。系統采用免維護設計，不再需要電池，采用高能電容防止掉電引起的數據丟失。 System software is stored into the Flash-EPROM in SINUMERIK 802S base line. All tools for machine tool starting up (Tool box software) are included in the scope of supply. The system is designed as Maintenance-free: Without battery, High energy Capacitor for NC data keeping.

初始化數據面向車床和銑床應用，并可單獨安裝。在每一個工具盒中都包含有車床和銑床的PLC 程序示例，以便用戶能很快地調試完畢。
Configuration data for turning and milling could transfer separately .PLC sample programs for both turning